Seat Bags

Lezyne's Ex Caddy is an expandable wedge shaped caddy with a lower portion that unzips when more storage is needed. Labeled internal organizational pockets provide extra organization. A buckle system securely attaches the Caddy to the seatpost and seat rails. Durable woven nylon fabrics, water resistant zippers, reflective logos, and reflective tail light loop make this caddy ready for all weather and nighttime riding.

Carry just the necessities in Topeak's Large Aero Wedge Pack. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

Carry just the necessities in Topeak's Micro Aero Wedge Pack. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

Aerodynamic seat bag holds tubes, tools and other repair items. Mounts with our innovative Quick Release Buckle system to fit all railed saddles. Specs: - BAG ATTACHMENT: Nylon straps / Buckle - MATERIAL: 1200 denier polyester - SEATPOST DIAMETER: Fits 27.2 - 34.9 mm - SIZE: 16 x 8 x 7.5 cm / 6.3" x 3.1" x 2.9" - CAPACITY: 0.41 L / 25 ci - WEIGHT: 85 g / 2.99 oz - ADDED FEATURES: 3M reflective strip, Safety light clip

Oceanweave 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Heavy-duty seat rail buckle and straps pull up to tighten. - 3 rubberized modular seatpost straps with Camlock ensure things stay tight while eliminating potential damage to clothing. - Top mount bungee system with wings provides optimum stability to top loads etc. - Top bungee system for additional flexible storage. - Supplemental rear closure strap system provides additional support. - Ultra-visible rear 3M triangle logo. - Polypropylene plates below saddle ensure ample leg clearance even if heavily loaded. - Built-in U-lock holder and rear light clip.

Banjo Brothers' Medium Seat Bag is perfect for carrying a tube, tire levers, patch kit, a mini tool, your wallet and some food (each sold separately). And if you're going big, it expands to haul more gear. It's made from super-tough 1680-denier nylon with a full liner and a padded top and bottom. It's got a wide-mouth opening for easy access, three interior pockets and a key clip to keep your gear organized, plus gusseted sides that keep your gear in place when the bag is open. And you've got 360 degrees of visibility with reflective accents and a tab so you can attach a taillight.

A lightweight under-the-seat bag for carrying ride essentials. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. - Volume 0.8 L / 51 cu in - Weight 72g / 0.16 lbs - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating; Red interior liner improves internal visibility - Lightweight Velcro saddle-mounting system can be cinched down to ensure a quiet load - Zippered flap opening for easy access to bag contents while bag is on bike - Interior ID pocket - Ultra-visible 3M triangle logo - LED light clip

Planet Bike's Little Buddy is the perfect friend to bring along on every ride. It's made of tough material and has a padded, white interior to protect, and make it easy to see your things. Its 44 cubic inches of capacity handle all your essentials. It's also got a diagonal zipper for easy access, a taillight strap (lights sold separately) and reflective piping for visibility.

Small, wedge-shaped saddle bag. Velcro straps attach to saddle rails and seat post. Durable woven nylon construction. Labeled internal organizational pockets. External, quick access multi-tool sleeve. Reflective logos and loop increases night visibility. Water resistant zipper with large pull loop. Specs: - WEIGHT: 60g - DIMENSIONS: 110 x 55 x 90mm - CARGO: 0.3L

- Adventure ready saddle mounted removable drybag and holster system - Includes waterproof carry bag with air release valve to keep gear dry and compact - Bag easily slides in and out of holster without having to remove from bicycle - 15L measures 19.7

The essential accessories that complement a new bike are key to having the best experience. MSW Ride & Repair Kits combine all those ride essentials into one convenient, money-saving package. Available in several configurations to meet the needs of different types of riding and different types of riders. - This Ride and Repair Kit provides everything needed to fix a punctured tire. The kit includes an eight-piece multi-tool, glueless tire patch kit, three tire levers, CO2 inflator & cartridges, and a seat bag to put it all in - 50 cubic inch seat bag with hook-and-loop mounting straps - Three MSW tire levers - Eight-piece flat-pack multi-tool with 2/3/4/5/6mm hex wrenches, T25 Torx, flathead & Philips screwdrivers - Glueless patch kit with six patches, sandpaper, instructions - AirLift mini frame pump with a large chamber, locking handle and carrying mount

The Mini Mountain Wedge Series offers seat bags that are designed to stand up to the rigors of serious on- and off-road cycling. - Large main compartment and small exterior zip pocket - The three-point suspension system consists of a seat post hook-and-loop strap and a 3/4-inch main webbing strap that threads over each seat rail - A side-squeeze buckle allows for easy removal - Made of Dupont Cordura - Weight: 99 grams - Capacity: 53 cubic inches

XLAB has designed the first aerodynamic repair storage bag for single rear systems with their Aero Pouch 300. It sports a compact, sleek design while carrying a great deal of essential repair tools. • Fits around the bottle cage on all metal XLAB single rear systems • Simple install by using the 2 bottle cage holes • Actually helps the drag behind you by collecting the air into a smooth airflow • Velcro zipper pull stays down to avoid zipper flapping drag Includes: • AERO POUCH 300 bag • All required hardware for mounting onto metal DELTA systems • Installation Instructions Material: • Tough woven nylon • Rigid insert to maintain shape • Weight: 107 grams Fits all metal XLAB single rear systems • DELTA 300 • DELTA 400 • DELTA 425 • DELTA SONIC • DELTA SONIC XL

Don't overstuff your jersey pockets. Simplify your load by putting your essentials in Topeak's Aero Wedge Pack. It straps neatly beneath your seat and is constructed of durable 1200-denier, Teflon-coated polyester with reflective strips and a taillight mount for nighttime safety.

Topeak's Tri DryBag keeps your gear dry no matter the weather. Composed of water-resistant fabric, this top tube pack sports a flap that folds over the opening and prevents water penetration. It attaches via hook-and-loop straps and you'll have plenty of room for carrying your phone, wallet, tools and energy bars in this streamlined bag.

Topeak's Wedge Pack II features a unique, positive locking mount that makes attaching and removing the pack a snap. A rain cover is included, if you get caught in a storm; just cover the pack and your belongings will stay dry. The Wedge is great for carrying tubes, a C02 pump, wallet, keys and whatever else you need. For low-light conditions, a 3M reflective stripe adds safety and its 1000-denier, Teflon-coated construction makes the Wedge Pack durable and tough.

The Banjo Brothers Quick-Release seat bag. Remove your seat bag quickly with no fuss. Great for security and for using one bag across two or more bicycles. Easy on/off Twist tabs onto seat rails and then attach the seatpost strap. Two sizes. - Heavy duty 840 denier nylon construction - Cinch-strap to keep contents snug - Wide-opening design for easier access - Flap hinges up from bottom to keep contents in place - 360 degree reflective accents and web loop for light - Light loop - Fits most saddle rails

MSW's simple strap-mounted Brand New Bags come in three sizes so you can carry along your keys, phone, wallet or emergency repair kit--or whatever else you need to make your bike ride great. - Combination 600D polyester and 420D nylon outer with 210D Nylon lining - Simple strap and clip attachment - 3M reflective strip - Loop for clip-on lights - Small: 6.3 x 2.8 x 4.1" - Medium: 7.7 x 3.3 x 4.7" - Large: 7.5 x 3.9 x 5.3"

Named after the Italian word for Brick, Mattone is a water-resistant, ultra-compact seat bag that attaches to the rails using the BOA Closure System.  Unique zipper design allows it to be accessed while on the bike, or to open like a book when removed from the bike for easy access. Mattone is for the cyclist looking to carry a spare tube, CO2, multi-tool, and some cash in a discreet, water-resistant package. Internal divider holds ID, credit card, or cash while also protecting your tube from your multi-tool! Seat bag users fall into two categories: Seat Roll aficionados and seat bag users. Traditionally, seat bags have been simple open spaces that allowed content to jangle about, making noise and rubbing against each other. Often times a spare tube was pulled out of a seat bag to reveal it was more full of holes than the tube being replaced due to friction against a house key or multi-tool. With Mattone, we designed a layout similar to a book, where the bag can fully open to hold the tube and CO2 cartridge on one side, separated by a padded ballistic nylon 'page' separating it from the other side where you can store an inflator head, multi-tool, contact lens case, etc. The 'page' also contains a slot for a credit card, ID, money, or house key. The unique off-center Aquaguard Zipper allows the case to completely open and lay flat when off the bike, while also allowing easy access to the multi-tool and money/card slots when on the bike without risk of spilling all the contents of the bag. A high-friction Hypalon strap with BOA Closure completes the package. Making more than 15x the power of Velcro, the BOA Closure uses a ratcheting mechanism that will not creep or loosen even under the most extreme vibration and impact. This ensures the Mattone will remain 'high and tight' under your saddle until you need to access it...no swinging, swaying, or rattling...ever. - Exterior—Sleek black finish with reflective graphics - Interior—Hi-contrast red material with separate ID, credit card, or money flap - Interior Volume—Holds one inner tube, one CO2 cartridge, one tire lever (all of these components are sold separately and are not included) - BOA Closure System with open guide release on Hypalon retaining strap - YKK Aquaguard zipper - Outside Dimensions: 13cm x 8.5cm x 5.5cm - Volume: Approximately .61 L - Strap Measurements: 27cm x 4.5cm

Listen to your inner voice of adventure. Pack up your gear, get on your bike, and ride that epic trail. BackLoader is a large-capacity seat bag specially designed for bikepackers providing a streamlined way to carry gear without the need for a rear rack. Constructed of lightweight, highly water-resistant and durable materials, it mounts and removes quickly. The upgraded saddle mount system, in conjunction with compression straps, reduces the pendulum effect associated with large rear payloads, providing a comfortable ride for those long miles. An easy-access waterproof inner bag is included to keep contents completely dry. - Polyethylene / Nylon — Lightweight, durable, water repellent and stain resistant - Hook and loop fastener - Waterproof Rating: 10,000mm (waterproof inner bag) - Max Load: 5kg / 11lb - Safety light clip - Air release button

The Clutch recycled and upcycled bicycle inner tube saddle bag is similar to the Shifter, only a little smaller. This bag fits snugly under your bike seat and can hold an extra tube, tools, and repair kit. It secures into place with a wrap-around strap offering a stable storage solution when you’re on the road. The storm-resistant exterior will keep your belongings dry in the rain, hail or snow. The reflective light loop enhances your visibility. Materials: - Upcycled Bicycle Inner Tubes - Upcycled Nylon Fabric - Nylon Teeth with Zinc Zipper - Hook & Loop, Nylon - Metal Hardware - Dimensions:3 L x 3.5 H x 5 D in./76.2 x 88.9 x 127 mm - Capacity: 52 cu in/.8 L - Weight: 3.5 oz/99.2 g Features: - Stormproof exterior - Reflective light loop - Universal hook & loop mounting straps - Built in Colorado - Made in the USA - Limited Lifetime Warranty

Want to bikepack without breaking the bank? Banjo Brothers to the rescue. A huge seat-mounted pack for bikepacking and commuting - no rack required. Usable capacity between 800 cu in and 350 cu in. 800 cu in (13L) – 22 x 7 x 6.25. Can be compressed down to 350 cu in when full capacity not needed. Rigid hull inside front of bag for secure support even when bag isn’t full. Removable waterproof liner. Requires a gap between saddle rails and fender of at least 8". - Weight: 2 lbs - Dimensions: 22.0"L 7.0" H x 6.25" W - Capacity: 800 cubic inches / 13L - Removable waterproof liner. - Requires a gap between saddle rails and tire of at least 8". - Imported

Carry all the necessities in Topeak's Aero Wedge Pack DX. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and it sports separate compartments for your mini tool and tube, and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

- Waterproof - Reflective Elements - Mount for clip on light - Spacers for handlebar spacing - 9 Liters 700x315mm - 2.4 gallon 27.6x12.4in

We set out to create the most stable, low profile mounted, feature loaded, waterproof seat bag available. The Spinelock seat bag checks all the boxes. The Spinelock integrates user tested and approved features like a one-way air purge valve, rear light slots, loop and bungee deck, and an external plastic bottom with a new patented attachment system. Stability was the driving element in the design process. If you want something you can pack and forget, the Spinelock is your seat bag. There are two size options, neither of which sacrifice features for capacity. The smaller but largely versatile Spinelock 10L maximizes your carry with minimal tire clearance and provides a generous amount of waterproof storage with additional space on the external corded deck. . If you are going on a long expedition or carrying cold weather gear we recommend checking out the Spinelock 16L. How it works: - The Spinelock stability system consists of three components: the saddle clamp, seat bag mounted "Spine" baseplate, and pin. - A low profile, high strength, forged aluminum clamp works in combination with precision IGUS bushings to form the pin interface. Twin forged upper arms, fastened by Torx-25 bolts, rotate into position above the saddle rails for easy mounting. - Resembling a spine ramp familiar to skateboarders, the "Spine" baseplate is made of an impact resistant UV-stabilized nylon and is integrated to the seat bag surface. The plate features two mounting positions to accommodate seatpost setback and saddle adjustments. To connect the bag, you simply line up your selected mounting position to the seat mounted clamp and slide the pin through the aligned holes. Attaching the side compression straps to the wings of the clamp fixes the pin in place and you're ready to ride!

- Material: water-resistant nylon - Mount: saddle/seatpost - Pockets: 1 internal - Closure: zip

Topeak's Wedge Pack II features a unique, positive locking mount that makes attaching and removing the pack a snap. A rain cover is included, if you get caught in a storm; just cover the pack and your belongings will stay dry. It's expandable, so you'll have plenty of room for carrying tubes, a C02 pump, wallet, keys and whatever else you need. For low-light conditions, a 3M reflective stripe adds safety and its 1000-denier, Teflon-coated construction makes the Wedge Pack durable and tough.

Carry all the necessities in Topeak's Aero Wedge Pack DX. It's constructed of heavy-duty 1000-denier, Teflon-coated nylon and it sports separate compartments for your mini tool and tube, and includes a handy quick-release mount that securely attaches the pack to your seat. And for nighttime safety, it features a 3M reflective strip and a taillight clip.

A weather-resistant, bikepacking-inspired / urban-inspired seat pack bag with built-in accommodation for a U-lock. Ideal for the commuting trunk bag user who doesn't want to use a rack. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Water-resistant stitched construction. - Heavy-duty seat rail buckle and straps, pull up to tighten. - 3 rubberized, modular seatpost straps with CAMLOCK, ensure things stay tight, while eliminating potential damage to clothing. Can use 2 or 3, in varied positions. - Top mount bungee system with wings, provides optimum stability to top loads, etc... - Top bungee system for additional, flexible storage. - Supplemental rear closure strap system provides additional support. - Ultra-visible rear 3M triangle logo. - Polypropylene plates below saddle, ensure ample leg clearance, even if heavily loaded. - Built-in U-lock holder. - Rear light clip.

Planet Bike's Big Buddy is the perfect friend to bring along on every ride. It's made of tough material and has a padded, white interior to protect, and make it easy to see your things. Its 80 cubic inches of capacity handle all your essentials. It's also got a diagonal zipper for easy access, a taillight strap (lights sold separately) and reflective piping for safety.