Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Volume tuning kits for Fox rear suspension service and repair.
- Type: Headset bearing - Discipline: Road, MTB - Material: Steel - Weight: 26g - Dimension: 1-1/4-inch - Bearing Type: ACB - Angle: 45° x 45°
KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains
Parts for the service of the seal and restore the smooth cycling of KS dropper posts.
The Problem Solvers Center Lock Adapter Kit allows riders to use 6-bolt rotors on Shimano Center Lock compatible hubs. - Not intended to be used with rotors over 180mm in diameter - Made of extruded, CNC-machined, and broached AL-6061-T6 - Designed for use with Center Lock hubs and 6-bolt disc brake rotors
Aeffect Crank Stopper Kit for Race Face Aeffect cranks slows and stops the crank for no-footed tricks.
Trigger Clamp/Bolt Kit For X0 X9 X7
Salsa Alternator 1.0 and 2.0 UDH Kit for post-mount brakes. - This Alternator Plate set works with all Alternator 1.0 and Alternator 2.0 compatible Salsa frames to allow the use of SRAM Full Mount derailleurs or SRAM UDH. - Fixes wheel in rearmost Alternator plate position (17mm back) - Native 160mm post-mount disc brake compatibility (no IS adaptor required) - Includes required upper non-drive side bolt (choose 16mm or 18mm length to match frame thickness) and lock nut. All other hardware is re-used from current plates or can be purchased in the Alternator 1.0 or Alternator 2.0 Hardware Kit. - Requires a 12mm thru axle with 1.0TP and either a SRAM UDH or SRAM Full Mount derailleur (not included). Consult the Plate Kit instructions for recommended axle length based on the frame hub standard. - Engineering Identifier Number: 06-004162
Replacement Enduro 6806/29 ABEC-3 sealed bearings for Wheels Mfg DUB Compatible bottom brackets. - Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Kyodo Yushi SRL grease or equivalent - Imported - Sold as Bag of 2
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
ShiftMounts are adapter mounts that allow you to integrate SRAM and Shimano shifters with several different brakes from Shimano, SRAM, and Magura, or mount shifters directly to handlebars independent of brakes. Handlebar space is prime real estate and the ShiftMount seamlessly integrates brakes and shifters for a clean look. - MM-ISEV is for a SRAM MatchMaker shifter mounting to a Shimano I-SPEC EV brake - Designed to work with rear (right side) brakes and shifters. - Consult the brake and shifter manufacturers to understand which mounting interface you have on your brakes and shifters. - MM-ISEV is compatible with M9100, M9120, M8100, and M7100 Brakes. Deore M6100 or M4100 brakes will mount but the positioning is not optimal so we would consider them not compatible. - MM-ISEV, MM-ISII, & MM-MAG: while they will technically mount to a Sram AXS shifter pod, we do not recommend it. With SRAM AXS, the shift lever will be further towards the end of the bar, or closer to the rider's hand than is ideal for most riders. - Shimano I-SPEC A, Hope, and TRP brakes are not supported. - Shimano I-SPEC EV to Magura brakes is not supported because of geometric challenges. - ISII- 22 Clamp is compatible with Shimano XT M8000 and XTR M9000 shifters. - NOT compatible with Shimano SLX M7000, Deore M6000. - For handlebar clamp ShiftMounts tighten clamp bolt to 1-2 Nm max torque.
The Wolf Tooth Post To Flat Mount Brake Adapter allows flat mount brakes to be added to a frame or fork that was designed for post mount brakes. This is a vital component for cyclists who want to run a road groupset on a mountain bike frame. - Please note that this is a +20mm adapter, which means a 140mm post mount native size will only work with a 160mm rotor, just as a 160mm post mount native size will only work with a 180mm rotor, and so on - Fits on post mount native sizes 140, 160, and 180mm - Works with rotor sizes 160, 180, and 200mm - Tested with SRAM and Shimano brakes - Requires minimum 13mm between top of brake boss to frame/fork - CNC Machined from 6061-T6 aluminum for strength and light weight - Includes : (2x) M5x13mm Flat Head bolts for Flat Mount Caliper and (2x) M6x15mm Socket Head bolts for Post Mount
$0.16
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring
$0.70
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings
$0.79
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
$0.99
Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).
$1.00
- Aheadset preload adjusting bolt
$1.00
Service parts for Fox suspension.
$1.00 - $36.00
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
$1.00
Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push
$1.25
Dimension Anodized M5 Bolts fits most standard bottle boss and accessory mounts. - Fits most standard bottle boss and accessory mounts - Tapered socket head with 4mm broach M5 diameter bolt, 0.8mm thread pitch - 16mm thread length - Aluminium - Sold individually
$1.30
Replacement piston and seals for Hope disc brake calipers.
$1.58
Saddle clamp heads and lowers for KS Dropper posts.
$1.65 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$1.79
- Model: Replacement bolt - Compatibility: Allen, M5x16
$1.99
HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal
$1.99
Replacement bearing for the lower half of YST8003 #7 headset.
Page 1 of 55 Next page