Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Parts

iSSi Cleat Set
$16.50
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered. - 4 degrees of float both inward and outward
iSSi Flash II
$85.00 - $90.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. - Bushing / Sealed bearing spindle, 52.5mm - Models with longer spindles available in BlackOut - SPD-compatible cleats and mounting hardware included
iSSi Road Carbon Pedals
$100.00
The iSSi Road Carbon Pedals provide large platforms for excellent power transfer and stability. Bushing and sealed cartridge bearings add durability, while the Chromoly spindles resist corrosion for long life. - Simple installation with a 8mm hex key - Stainless Steel cleat plate provides a solid pedal interface - Adjustable spring tension - 7° float, 3-bolt split-cleat included - Cleat Interface: Look KeO - Material: Carbon - Pedal Body Material: Aluminum - Pedal Spindle: 9/16-inch - Pedal Type: Single-Sided Clipless - Spindle Material: Chromoly steel - Weight: 266 grams
Zipp Service Course 70 Ergo Handlebars
$55.00
Zipp’s Service Course 70 Ergo bars ensure comfort and control for every hand position, thanks to their ergonomic flat tops and easy-to-reach drops. A short reach and the revised ramp angle make the drops more accessible and comfortable. This lets you get low and aero without compromising comfort or control. Stiff for uncompromising strength, these aluminum bars are ready for anything.
Zipp Tangente Platinum Pro Evo Brake Pads
$44.00
Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.
Wolf Tooth Components 64/104 Chainring
$59.95 - $69.95
- Standard 4-bolt ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy - 36g (30t)
Wolf Tooth Components CAMO Direct Mount Spider for SRAM
$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with the SRAM cranksets that have removable Direct Mount spiders and are only compatible with CAMO rings and bolts. Four different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M8 (minus 8mm - dished toward the frame): For 49mm chainline, used with GXP and long-spindle BB30 cranks. Designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes. - M5 (minus 5mm - dished toward the frame): For 52mm chainline (Boost) - M2 (minus 2mm - dished toward the frame): For 49mm chainline on short-spindle BB30 cranks - P2 (plus 2mm - dished outward away from the frame): For fat bikes that have 190/197 rear spacing but use a 100mm-spindle crank. Can also be used to achieve a Boost chainline with a short-spindle BB30 crank.
Wolf Tooth Components Cyclocross Chainring
$79.95 - $89.95
- Cyclocross ring with Drop-Stop tooth design to prevent unwanted chain drop - Recommended for use with 10 or 11sp chain (10sp chain works on 9sp drivetrain) - Designed and manufactured in the USA from 7075-T6 aluminum alloy
Wolf Tooth Components ReMote Dropper Post Lever
$64.95 - $69.95
The Wolf Tooth ReMote is a significant lever upgrade for cable-actuated dropper seatposts. From its hassle-free installation to smooth ball bearing action to engineered failure point, the lightweight ReMote solves many of the functional problems that come with other dropper lever designs. - Includes barrel adjuster for on-the-fly changes - Lever pivots on a 21mm ball bearing for smooth operation - Engineered break-away pivot that allows the lever to break away from the mount in the event of a crash - Cable Kind Clamp does not damage secured cables and features captive hardware - Integrates with SRAM/Avid MatchMaker X clamp-equipped brake levers for better ergonomics
Wippermann Chain Connectors
$5.95 - $13.95
- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains
Whisky Parts Co. No. 7 Stem
$40.00 - $45.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Wheels Manufacturing Inc. 386EVO Angular Contact Bottom Bracket for 24mm Shimano Cranks
$110.00
Thread together BB for 386EVO frames and 24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width: 86.6mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 24mm - Over Bearing Width: 91.5mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 133g
Wheels Manufacturing Inc. Aluminum Headset Spacer
$3.00 - $23.75
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Wheels Manufacturing Inc. BB30 ABEC-3 Bearings & Clip Kit
$32.00
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings
Wheels Manufacturing Inc. BB30 Adapter for Campagnolo Cranks
$50.00
The Wheels Manufacturing BB30 Bottom Bracket Adapter for Campagnolo Ultra- Torque Cranks adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr * The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.
Wheels Manufacturing Inc. BB86/92 ABEC-3 Bottom Bracket
$70.00
Wheels Mfg original BB86/92 bottom bracket is a significant upgrade to any OEM BB86 bottom bracket. Two machined aluminum cups offer increased durability and bearing life, while keeping a simple press together method for installation and maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 114g
Wheels Manufacturing Inc. BB86/92 Thread Together Angular Contact Bottom Bracket
$110.00
Wheels Mfg BB86/92 thread together bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Note: Use only bottom bracket tools compatible with 16-notch, 48.5mm outer diameter cups. - Bearings: Enduro Angular Contact - Color: Black - Bottom Bracket/Frame Interface: BB86, BB92 - Bottom Bracket Shell Width (mm): 86mm, 92mm, 89.5mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 106g
Wheels Manufacturing Inc. Derailleur Hanger 110
$25.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 162
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 167
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - For carbon frames, use (2) M3x8 Flat head screws - For all non-carbon frames, use (2) M3x10 Flat head screws
Wheels Manufacturing Inc. Derailleur Hanger 168
$29.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M5x10 Socket Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 169
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x12 Flat Head Screw, (1) M4x12 Socket Head Screw
Wheels Manufacturing Inc. Derailleur Hanger 17
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws Note: Wheels Mfg DROPOUT-17 measures 15.49mm between the 2 mounting holes (center to center) and 4.7mm between the 2 vertical plates.
Wheels Manufacturing Inc. Derailleur Hanger 176
$25.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 21
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 234
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws
Wheels Manufacturing Inc. Derailleur Hanger 240
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M4x8 Flat Head Screw, (1) Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 25
$25.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Inc. Derailleur Hanger 256
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Jamis #65-0001 - (1) M8 Chainring bolt included
Wheels Manufacturing Inc. Derailleur Hanger 266
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - (2) M3x8 Flat head screws included - GT Hanger #ATIDH0233
Page 1 of 174 Next page