Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Parts

$79.99
3T's Arx II is a subtle refresh of the well-liked Arx alloy stem, which has found a place on every sort of bicycle since its launch in 2007. The faceplate is drawn in tighter at top and bottom for a more ovalized frontal appearance, while retaining the cutout 3T logo. The sides of the extension are slightly flattened for a more sculpted look by comparison with the tubular section of the first-generation Arx. A single M7 bolt clamps the stem to the fork steerer, instead of the twin M5 bolts previously used, and the Allen bolts used on the original Arx have been replaced by no-strip Torx bolts. - Stack height: 40mm - Weight: 135g (110mm)
$99.00
A wide flat pedal with wicked grip, 45NRTH's Heiruspecs deliver supreme contact with the bottom of your traditional winter boots. The big CNC-extruded body provides a massive footprint and 16 alloy pins spread across the concave body to provide the ultimate grip. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 18mm high - Spindle diameter: 9/16-inch - Weight: 352 grams
$165.00
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams
$14.66 - $15.95
Super hardened steel designed for high torque Singlespeed and BMX use.
$1.00
- Aheadset preload adjusting bolt
$6.00
Use these to shim All-City's cross levers down from 31.8mm to 26.0mm. - Adapts down to fit 26.0mm road, cross, or drop bars - For use with All-City Cross Levers with 31.8mm bar clamp - Sold as a pair
$20.00
This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames
$20.00
All-City Singlespeed Disc Brake Adaptor 
$22.00
- Chromoly steel with black oxide finish - 1.37" x 24tpi right hand thread - Requires a cog lockring (sold separately) - Compatible with 1/8-inch chains
$25.00
Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware
$45.00
Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included. - Aluminum hatch cover with stainless screws - All necessary screws and plates included
$4.00
- Noodle/Boot completely seal brake cable, upgrades most linear brakes
$6.00
- Replacement barrel adjuster for FR5 and SD7 levers - Includes one pair
$7.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$9.00
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
$14.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$18.00
Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
$19.00 - $30.00 $19.00 - $30.00 On Sale
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$23.00 - $58.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$23.00
- Includes stainless bolts - Fits 160mm front and 140mm rear rotors
$24.00
- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors
$25.00 - $33.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.00 - $35.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$27.00 - $33.00
To keep your Avid Trail brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a retaining bolt are included (enough for one brake) in each pad set. And, there's an aluminum backing plate option if you're really counting the grams.
$27.00
Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
Page 1 of 197 Next page